Русский
Hi-Tech
Aquabreather Hydroid
for diving
NEW DIVING ERA

NO MORE BULKY EQUIPMENT, HEAVY CYLINDERS, VEST AND HOSES. NO MORE ANNOYING BUBBLES.

ONLY HYDROID Aquabreather Hydroid.

Hydroid

Hydroid is a pioneering regenerative Aquabreather.

3D Модель

Hydroid Aquabreather will unveil the world of diving with a maximum depth of up to 42 meters and it will allow you to spend at least an hour underwater. Weighing only 4.5 kg, the apparatus does not require assembly and disassembly. You only need to install two disposable regenerative cartridges, fill the cylinder with 40 liters of air using a high-pressure manual pump, and you are ready to conquer the depths. The absence of bubbles during diving, an incredible endurance, the highest level of safety and fantastic comfort will delight you.

TECHNICAL CHARACTERISTICS

Aquabreather

Aquabreather is a regenerative breathing apparatus

Aquabreather's working principle is based on the properties of alkali metal superoxides. These are sodium superoxide NaO₂ and potassium superoxide KO₂. The superoxide-based multicomponent mixture used in the Aquabreather ensures not only absorption of carbon dioxide CO₂, but also its conversion into oxygen О₂ with the required regeneration factor. In Aquabreather, a regenerative mixture is kept in replaceable disposable cartridges. Only two cartridges with a volume of 0.66 liters are enough for more than an hour of diving.

Aquabreather action principle
HOW IT WORKS

In Hydroid Aquabreathers, the breathing mixture (air) is not exhaled outwards. It circulates inside a closed breathing circuit. When exhaled, the air rich with CO₂ enters a regenerative cartridge. The multicomponent mixture reacts with CO₂ converting it into oxygen O₂.

FEATURES

All-in-one System

Aquabreather is a single-block All-in-one System.

There are no oxygen cylinders in Aquabreather. A brilliant solution for the bulky equipment challenge. The unique design of Hydroid Aquabreather allows us to combine all the components of an underwater breathing apparatus in one unit. A full face mask is equipped with a valve system to prevent moisture from entering the breathing circuit (the volume of which is 6 liters). The Aquabreather’s optimal dimensional ratio and ideal mass balance will allow you to forget that it was ever put on, and you will get great pleasure during the dive. Only you and the ocean.

RRC Cartridges

RRC — watertight Replaceable Regenerative Cartridges.

Each Hydroid Aquabreather is equipped with two reactors to accommodate regenerative cartridges. The reactors are cylindrical in shape and made of fluoroplastic (PTFE). A screw cap with a moisture-resistant gasket reliably fixes and seals cartridges against water entering the circuit. You only need to place a cartridge in the reactor and tighten up the cap. This allows you to complete the entire cartridge installation process in a split second.

GASystem

GASystem (Gas Analyzing System) analyzes the breathing mixture in the circuit.

In order to monitor the composition of the respiratory mixture in the circuit, Aquabreather uses a system for the analysis of the partial pressure of oxygen O₂ and carbon dioxide CO₂. The partial pressure parameters are displayed on the monitor in the Aquabreather’s visor and are clearly visible during the dive. Upon reaching critical parameters, the analyzer activates an audio and visual signal. The Aquabreather’s electronics is not a control system. It performs an informational function only.

Be the first owner of Hydroid

Make a pre-order request:

*

*

*

By clicking the 'PRE-ORDER' button I give my consent to the processing of my personal data in accordance with the Federal Law On Personal Data No. 152-FZ dated July 27, 2006, under the conditions and for the purposes specified in the Consent to Personal Data Processing

* - Required fields

Contacts

Aquadiving LLC
Located at: Bldg. 40, letter B, Chugunnaya str. 194044, St. Petersburg

T: +7 (812) 318 5957

Join the AQUADIVING team

Warning: Notice of Intellectual Property Rights Infringement

The terms 'Hydroid', 'Aquabreather', 'Aquadiving' are the means of AQUADIVING LLC identification, which are legally protected commercial designations, brand names and trademarks. The technology and designs used in the Hydroid Aquabreather project are protected as copyright objects and by patenting. The exclusive rights with respect to the name, technology and design belong to AQUADIVING LLC. AQUADIVING LLC warns about the impermissibility of copying or reproducing, partly or in full, the objects of intellectual property belonging to the company, as well as the impermissibility of their processing without prior written permission from AQUADIVING LLC. In order to receive written permission, please contact us at: Bldg. 40, letter B, Chugunnaya str. 194044, St. Petersburg